Loading ...
Loading ...
Loading ...
INSTALLATION
STEP 3: PREPARE THE VENTING BLOWER
4. Reassemble the blower wire. See Figure 15.
5. Rotate the unit so that the exhaust ports face the rear of the cabinet. See Figure 16. When you insert blower
unit, blower wire must be like figure 16.
6. Place blower unit back into cabinet. Check that the exhaust ports face towards the rear of the cabinet. See
Figure 17.
7. Reattach the blower plate to cabinet so the exhaust ports and blower plate opening are aligned. Attach with
one blower unit mounting screw and then one blower plate mounting screw. See Figure 18.
Figure 15
1
Figure 16
unit
exhaust
ports
plate
mounting screws
exhaust
ports
Figure 17
blower unit
exhaust ports
Figure 18
"'_ blower unit
mounting screws
ROOM-VENTED (Recirculating) INSTALLATION:
1. Remove one blower unit mounting screw and one blower
plate screw. Remove the blower plate from cabinet.
See Figure 19.
2. Carefully lift the blower unit out of the microwave oven.
3. Rotate blower unit 90° so the exhaust ports face the
front of the cabinet. See Figure 20.
4. Place blower unit back into microwave oven.
___ bml°uWetrinla_erews
blower unit
mountingscrews
Figure 19
5. Reattach blower plate to microwave oven. Attach with the one blower
unit mounting screw and then the one blower plate mounting screw.
See Figure 21.
\
_ blower plate
mounting screws
unit
"'_ blower unit
mounting screws
Figure 20
Figure 21
-15-
Loading ...
Loading ...
Loading ...