Loading ...
Loading ...
Loading ...
14
Caring for the Camera
❚❚ Storage
When the camera will not be used for
an extended period, turn the camera
o and remove the battery. Do not
store in locations that:
• are poorly ventilated or subject to
humidities of over 60%
• are next to equipment that
produces strong electromagnetic
elds, such as televisions or radios
• are exposed to temperatures above
50°C (122°F) or below –10°C (14°F)
❚❚ Cleaning
Camera Body
Use a blower to remove dust and
lint, then wipe gently with a soft, dry
cloth. After using the camera at the
beach or seaside, wipe o sand or
salt with a cloth lightly dampened in
distilled water and dry thoroughly.
Important: Dust or other foreign matter
inside the camera may cause damage
not covered under warranty.
Lens, Mirror, and View nder
These glass elements are easily
damaged. Remove dust and lint with
a blower. If using an aerosol blower,
keep the can vertical to prevent
the discharge of liquid. To remove
ngerprints and other stains, apply a
small amount of lens cleaner to a soft
cloth and clean with care.
Monitor
Remove dust and lint with a blower.
When removing ngerprints and
other stains, wipe the surface lightly
with a soft cloth or chamois leather.
Do not apply pressure, as this could
result in damage or malfunction.
* Do not use alcohol, thinner, or other
volatile chemicals.
Troubleshooting
❚❚ Battery/Display
The camera is on but does not respond: Wait
for recording to end. If the problem
persists, turn the camera o . If the
camera does not turn o , remove
and reinsert the battery or, if you
are using an AC adapter, disconnect
and reconnect the AC adapter. Note
that although any data currently
being recorded will be lost, data
that have already been recorded
will not be a ected by removing or
disconnecting the power source.
View nder is dark: Insert a fully-charged
battery.
Displays turn o without warning: Choose
longer delays for Custom Setting c2
(Auto o timers).
View nder display is unresponsive and dim:
The response times and brightness of
this display vary with temperature.
Fine lines are visible around active focus
point or display turns red when focus point
is highlighted: These phenomena are
normal for this type of view nder and
do not indicate a malfunction.
❚❚ Shooting (All Modes)
Camera takes time to turn on: Delete les
or folders.
Loading ...
Loading ...
Loading ...