Loading ...
Loading ...
Loading ...
EN / 36
6.15.3 Deleting the HomeWhiz Ac-
count Match
Follow the following steps in order to delete
a washing machine previously matched with
someone else’s account.
a. Turn on your machine by using the On/
Off button.
b. When your machine is running, push and
hold the Remote Control Function button
and End Time Setting buttons for 5
seconds.
c. You will hear warning sound from the
product to notify your request after the
countdown on the screen. Deleting the
match will take a few seconds.
After this operation, you cannot use the
HomeWhiz function of your washing ma-
chine until you do another setup.
Your product does not need to be connec-
ted to the internet in order to delete an ac-
count matching. Your request will be re-
ceived. This matching will be automatically
deleted when the product is first connected
to the internet.
6.15.4 Remote Control Function
and Using It
After HomeWhiz setup, bluetooth will auto-
matically turn on. To activate or deactivate
the Bluetooth connection, please see
Bluetooth 3’’.
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device go-
ing off the range, bluetooth will automatically
turn off. For this reason, you will need to turn
on the bluetooth again if you want to use the
Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If the
symbol is continuously on, you have
bluetooth connection. If the symbol is flash-
ing, the product is trying to connect. If the
symbol is off, you have no connection.
When the bluetooth connection is on
in your product, Remote Control
function will be selectable.
If the Remote Control function can-
not be selected, check the connec-
tion status. If the connection cannot
be established, repeat the initial
setup steps over the product.
WARNING: For safety reasons, the
product door will be locked and re-
main locked regardless of the oper-
ating mode of the product when the
Remote Control function is activ-
ated. If you want to open the door of
the product, you will need to turn the
programme selection knob or press
the remote control key to deactivate
the remote control function.
When you want to control your washing ma-
chine remotely, after the front lid is closed,
you need to activate the Remote Control
function by pressing the Remote Control
button while the programme knob is in the
Download Programme/Remote Control posi-
tion button on the control panel of your
washing machine. Once access is estab-
lished to the product, you will see a screen
similar to the one below.
When the Remote Control is enabled, you
can only manage the machine, turn it off and
follow the status through your washing ma-
chine. And all functions except child lock can
be managed through the application.
Loading ...
Loading ...
Loading ...