GE - General Electric ZSC2001CSS GE microwave

User Manual - Page 38

For ZSC2001CSS.

PDF File Manual, 44 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Troubleshooting
Advantium Oven
Questions ?
Use this
problem
solver
Problem Possible Causes What To Do/Explanation
LIGHTS
There is no oven This is normal. The Press MICROWAVE/OVEN
light on during glass is too dark lbr LIGHT button to light the oven.
microwave cooking a microwave light.
Light during a This is normal. This is normal. The oven senses the
speedcook cycle Power level h_ been heat level and adjusts automatically.
dims and cycles on automatically reduced
and off, even at full because the oven is hot.
power levels
Light visible around This is normal. When the oven is on, light may
the door and outer be visible around the door and
case while outer case.
speedcooking
FAN
Fan continues to run The oven is cooling. The fan will automatically shut off
after cooking stops when the internal parts of the oven
have cooled.
Oven vent emits warm This is normal.
air while oven is on
Fan comes on This is normal. If the microwave is used after
automatically when speedcook and the oven senses
using the microwave that it is too hot, the vent fan comes
on to cool the oven.
COOKING
The oven makes Clicks and fans blowing These sounds are normal.
unusual sounds are normal. The relay
while cooking board is turning the
components on and off.
Smoke comes out Food is high in fat Smoke is normal when cooking high-
of the oven when content. Aerosol spray fat foods. Use vegetable oil or olive
I open the door used on the pans. oil on tile meat itself instead of
coating tile entire pan.
Food is not fully
cooked or browned
at the end of a
cooking program
Programmed times
may not match the size
or amount of food you
are cooking.
Increase or decrease time for
doneness or adjust the upper or
lower lamps lbr browning; change
the microwave power lbr doneness.
There may be grease
buildup on the glass
covers.
Clean the light covers with a scraper.
38
Loading ...
Loading ...
Loading ...