Loading ...
Loading ...
Loading ...
15
INSTALLATION INSTRUCTIONS
Connect the water supply line to the water valve using the compression nut fitting
provided (C). Secure the water supply line to the back of the cabinet using the screw
and clamp provided in the corner of the back panel (D).
When connecting the water supply line to the water supply inlet, connect the copper
tubing to the “top side” of a cold water pipe to prevent the ice maker from being
blocked with sediment. Form the tubing so that it will not vibrate against the cabinet
body or kink when your appliance is moved in and out of position.
Ensure all connections are watertight after installation. Additional tightening to the
water supply inlet or water valve inlet may be needed.
The ice maker is designed to make clear ice from the majority of water sources on
a daily basis. If your results are unsatisfactory, your water may need to be filtered or
treated.
A quality water filter can remove particles as well as remove taste and odors from water.
Do not use a ‘Reverse Osmosis’ filtering device.
Softened water is not recommended. This will produce soft, cloudy ice cubes that will
stick together.
De-ionized water is not recommended. This water will not form solid ice cubes.
A water specialist can recommend proper water treatment.
Loading ...
Loading ...
Loading ...