Loading ...
Loading ...
Loading ...
● All information in this publication was based on the latest product information available
at the time of printing. The FNA Group reserves the right to change, alter, and/or
improve the product and this document at any time, without notice, and without incurring
any obligation.
● The pictures and gures in the manual should be used for reference only. There may be
dierences between the pictures, drawings, gures, and the physical product.
● This pump may be equipped with a spark arrestor muer. The spark arrestor must be
maintained in eective working order by the owner/operator. In the State of California,
a spark arrestor is required by law (Section 4442 of the California Public Resources
Code). Other states may have similar laws. Federal laws apply on federal lands.
1. Place the shipping carton on a solid, at surface.
2. Carefully cut the top of the carton open.
3. Carefully cut each corner of the carton from top to bottom.
4. Lay each side of the carton at on the ground.
5. Remove everything from the carton.
Follow the steps outlined in this section to unpack and assemble your pump. If you have
any questions regarding the unpacking or assembly of your pump, please have your model
number and serial number ready, then contact customer support at 1-877-362-4271 or
email [email protected].
Page 5
UNPACKING
DISCLAIMERS
This product and the engine exhaust can expose you to chemicals which are known to
the state of California to cause cancer, birth defects, or other reproductive harm. For more
information on California Proposition 65, go to www.P65Warnings.ca.gov.
CALIFORNIA PROPOSITION 65 WARNING
POLYCYCLIC AROMATIC HYDROCARBON WARNING
The air lter element and air box assembly may contain polycyclic aromatic hydrocarbons
(PAHs). Some PAHs may cause cancer. To avoid exposure to PAHs, wear gloves when
performing air lter maintenance.
Loading ...
Loading ...
Loading ...