Loading ...
Loading ...
Loading ...
DishDrawer
o 255_YL£ ]XU,SL
o Some foods, like tomato based
products, may stain the interior
of the DishDraweff.
CZ3
](
Pre-rinse dishes before placing in
DishDrawer'_or use the Rinse
program after adding dishes.
which may minimize the level of
staining.
D151_85 di r_@[ GY_
c3 Ensure the dishes are not nesting
together
o Refill the rinse agent dispenser
c3 Increase rinse agent setting.
c3 Choose a standard wash program.
o Incorrect amount of detergent.
o Too much egg in wash load.
o Rinse agent setting too high.
o Refer to Wash Programs section
or consult the manufacturer's
instruction.
c:3 Add detergent into the pre-rinse
compartment.
cn Decrease rinse agent setting.
cm Detergent was wet when loaded. o Clean the dispenser & ensure the
detergent dispenser is dry when
putting in detergent.
o Filter plate and/orspray arm is
incorrectly placed.
c3 No water in the motor area. Usually
occurs on the first use or when the
DishDrawer_has not been used for
long periods of time.
o Refer to User Maintenance section.
c3 Run the DishDraweff_ through a wash
program.
© Reconnect the drain hose to the
waste pipe.
c3 Securely reconnect the inlet hose.
o Turn water & electricity to
DishDrawer®off. Call your Fisher &
Paykel Dealer or Authorized Service
Center
!_nu_awer w;_ _ o Childlock function is on or the Closed c3
Drawer Option is on, or both.
Turn Lock off. Hold down LOCK
button until the "lock" symbol
(Prefinished) or green light
(integrated) disappears and/or press
the POWER button to open the
DishDrawer _.
O D shOrawer_i_ in pause mode. cn Close the DishDrawer'_and press the
START/PAUSE button.
5®n_nuou: _, c:3 A fault has occurred, c3 Refer to Fault Codes section.
19
Loading ...
Loading ...
Loading ...