Loading ...
Loading ...
Loading ...
5
Safety Warnings
CONDENSATION
Moisture will form in the operating section
of the unit if the unit is brought from cool
surroundings into a warm room or if the
temperature of the room rises suddenly.
When this happens, unit’s performance will be
impaired. To prevent this, let the unit stand in
its new surroundings for about an hour before
switching it on, or make sure that the room
temperature rises gradually.
Condensation may also form during the summer
if the unit is exposed to the breeze from an air
conditioner. In such cases, change the location
of the unit.
HOW TO HANDLE THE LCD PANEL
● Do not press hard or jolt the LCD panel. It
may cause the LCD panel glass to break and
injury may occur.
● If the LCD panel is broken, make absolutely
sure that you do not touch the liquid in the
panel. This may cause skin inammation.
If the liquid gets in your mouth, immediately
gargle and consult with your doctor. Also, if
the liquid gets in your eyes or touches your
skin, consult with your doctor after rinsing
for at least 15 minutes or longer in clean
water.
Possible Adverse Eects on LCD Panel: If a
xed (non-moving) pattern remains on the LCD
Panel for long periods of time, the image can
become permanently engrained in the LCD
Panel and cause subtle but permanent ghost
images. This type of damage is NOT COVERED BY
YOUR WARRANTY. Never leave your LCD Panel
on for long periods of time while it is displaying
the following formats or images:
● Fixed Images, such as stock tickers, video
game patterns, TV station logos, and
websites.
● Special Formats that do not use the entire
screen. For example, viewing letterbox
style (16:9) media on a normal (4:3) display
(black bars at top and bottom of screen); or
viewing normal style (4:3) media on a wide
screen (16:9) display (black bars on left and
right sides of screen).
The following symptoms are not signs of
malfunction but technical limitation. Therefore
we disclaim any responsibility for these
symptoms.
● LCD Panels are manufactured using
an extremely high level of precision
technology, however sometimes parts of the
screen may be missing picture elements or
have luminous spots. This is not a sign of a
malfunction.
● Do not install the LCD Panel near electronic
equipment that produces electromagnetic
waves. Some equipment placed too near
this unit may cause interference.
● Eect on infrared devices – There may be
interference while using infrared devices
such as infrared cordless headphones.
Power source: This LED television is designed
to operate on 120 volts 60 Hz, AC current. Insert
the power cord into a 120 volt 60 Hz outlet.
To prevent electric shock, do not use the LED
television’s (polarized) plug with an extension
cord, receptacle, or other outlet unless the
blades and ground terminal can be fully inserted
to prevent blade exposure.
Never connect the LED television to 50 Hz, direct
current, or anything other than the specied
voltage.
Warning: To reduce the risk of re or electric
shock, do not expose this apparatus to rain or
moisture.
Caution: Never remove the back cover of the
LED television as this can expose you to very
high voltages and other hazards. If the television
does not operate properly, unplug the LED
television and call your authorized dealer or
service center.
Adjust only those controls that are covered
in the instructions, as improper changes or
modications not expressly approved by Furrion
could void the user’s warranty.
Loading ...
Loading ...
Loading ...