Loading ...
Loading ...
Loading ...
9
Instructions for user - 9120-15002 - MCX - 801052 - March 2013 v1.01
8. Additional features
Activate / De-activate LED display
As part of the appliance’s energy saving feature, the active LED will automatically turn off 20 seconds after the last operation (e.g. tapping
or temperature selection).
To identify the current / selected setting at any time, the LED display can be enabled permanently therefore disabling the LED standby
function:
• Turn off the water at the outlet from the appliance.
• Press and hold the “Touch” key for at least 7 seconds. NB: the LEDs will go out after 5 seconds for a period of approximately 1.5 sec-
onds then light up again.
• While still holding down the “Touch” key, turn on the outlet tap. The LED will go out as confirmation that this option is now selected.
• Release the “Touch” key and turn off the outlet tap.
If the tap is opened or the touch key is used in LED standby mode (LED off), the last active LED lights up (wake up), but the temperature
setting will not change yet. Only when pressed once again, the temperature setting will be adjusted.
The LED Standby function can be re-activated using the same process above.
NB:
This function is retained even after power failure.
Loading ...
Loading ...
Loading ...