Loading ...
Loading ...
Loading ...
Care and Cleaning
Use care with laundry
products. They can damage finish on
the washer.
_sMe
• Removeitems from the washer assoon asthe cycleends. Excesswrinkling, color
transfer, and odors may develop in items left in the washer.
Dry the washer top, the area around the lid opening, and the underside of the
lid. These areas should always be dry before the lid isclosed.
• Beforecleaningthewasherinterior, unplugtheelectricalpowercordtoavoid
electrical shock hazards.
• When extremely soiled items have been washed, a dirty residue may remain on
the tub. Removethis by wiping the tub with a nonabrasive household cleanser.
Rinsethoroughly with water.
• The agitator or tub may become stained from fabric dye. Clean these parts with
a nonabrasive household cleanser. This prevents dye transfer to future loads.
Outside
• When washing iscompleted, wipe top and sidesof washer with a damp cloth.
Turn water faucets off to prevent pressure build-up in the hoses.
Asneeded, cleanthe cabinet with mild soapand water. Neveruseharsh, gritty
orabrasive cleansers, If top or lid becomes stained, cleanwith diluted chlorine
bleach [1/2 cup (120 ml) in 1 quart (.95 L)water]. Rinseseveral times with clear
water.
• Removeglue residue from tape or labelswith a mixture of warm water and mild
detergent. Or, touch residue with the sticky side of the tape or label.
• Beforernovingthewasher, placeastripofcardboardorthinfiberboardunder
the front leveling legs to prevent floor damage.
Follow Winterizing
Instructions for cold
weather care.
Winterizing Instructions
If the washer is stored in an area where freezing can occur or moved in freezing
temperatures, follow thesewinterizing instructions to prevent damage to thewasher:
1. Turn off water supply faucets.
2. Disconnect hosesfrom water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
4. Add 1 gallon nontoxic recreational vehicle (RV)antifreeze to empty wash tub.
Close lid.
5. Set cycle selector knob at a spin setting. Pull out knob and let washer spin for
1 minute to drain out all water. Not all of the RVantifreeze will be expelled.
6. Pushin knob, unplug electrical power cord, dry tub interior, and close lid.
7. Store washer in an upright position.
8. To remove antifreeze from washer after storage, run empty washer through a
complete cycle using detergent. Do not add wash load,
Loading ...
Loading ...