Loading ...
Loading ...
Loading ...
www.kitchenaid.com.au | www.kitchenaid.co.nz
Page | 4
Product description and symbols
1. Removable pan stand grids
2. WOK burner
3. WOK burner control knob
Control Symbols
Standard burners
Professional burner
Off
Maximum flame
Minimum flame
Off
Maximum flame outer ring/maximum flame inner ring
Minimum flame outer ring/maximum flame inner ring
Maximum flame inner ring/turned off outer ring
Minimum flame inner ring/turned off outer ring
Using the burners
To turn on one of the burners:
1. Turn the corresponding control knob
anticlockwise until the indicator coincides
with the maximum flame symbol .
2. Press the control knob to ignite the burner.
3. Once the burner has lit, keep the control knob
pressed for about 5 seconds to allow the
safety thermocouple fitted to each burner to
engage. The thermocouple will switch off the
gas supply to the burner should the flame be
accidentally lost (A gust of air, momentary
interruption of gas supply or liquid spillage
etc.).
To turn on the professional burner:
1. To simultaneously turn on both rings, turn the
knob anticlockwise to position it on the
symbol showing maximum flame for outer
and inner ring and push down the knob to
ignite the burner.
2. To keep only the inner ring ignited push down
the knob and turn it anticlockwise to position
showing maximum flame for inner ring and
turned off for outer.
If the burner does not ignite within about 15
seconds, switch off the burner, check the fitting
of the burner cap and plate for correct fitting.
Wait at least 1 minute before trying again.
If the burner goes out when the control knob is
released, the thermocouple did not engage. Wait
at least 1 minute before repeating steps 1 to 3.
Loading ...
Loading ...
Loading ...