Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
SERVICE
RECORDS
Fill in datesas
you complete
regularservice
ii
Before After
Each first2
Uso Houm
T{gh_nAll Screws and Nuts p4 v_
Lubflcale Ttne Sha|t tf
Lubr{cate Transmission
r C_ S_k Rug
Cie__d R_-OiiAircie_eiFiiiei
ioy!!o.o,
Drain Fue!
SCHEDULE
_=ry Every Before IBefore
75 Slorago Each
Hours Hours S_son
v' v"
v"
SERVICE
DATES
,, ,,,,.....
GENERAL RECOMMENDATIONS
The warranty on this mini tiller/cultivator
does not cover itemsthat have been sub-
jected to operator abuse or negligence,.To
receive full value from the warranty, the op
erator must maintain the mini tiller/cultivator
as instructedinthis manual, The above
chart is providedto assistthe operator in
properly maintaining the mini ti[ler/cuft{vator_
LUBRICATION
Every 25 hours and!or at the beginning of
each season, the gear box should be _led
with lubricant° Tubes of gear lubricant are
available from most automotive supply
stores, Use portable tool grease such as
Lubriplate 630AA (Product No. 06787, !-3/4
oz, tube) or Lubriplate GR-132 (Product No.
15892, t0 oz. tube),,The tine shaft should
have oil appliedto itbefore storage and af-
ter it iscleaned by flushing it with water.
The illustration to the rightis provided to as-
sist the operator in properly maintain{ng the
mini tiller/cultivator.
CAUTION: Allow the transmissionto
coolbefore fillingwith grease.
• Remove both left side tines_See Servlce
and Adjustments section in this manual
• Remove the air vent screw from the top
left side otthe transmission.
Using a grease gun, fillthe transmission
through the grease fittinguntil the new
grease begins to come out of the air vent
screw hole,
• Reinstall the air vent screw.
- Check the conditionofthe felt washer in
the side of the transmission at the tine
shaft. Replace the felt washer if it is
damaged (see Repair Parts section in
this manual).
• Clean tine shaft and spread a few clrops
of oil on shaft in fine replacement areas,
Reinstall the tines°
• Remove the right side tines. Check the
felt washer for damage, clean and oil the
line shaft, Reinstall the tines.
Transmission
Air VentScrew, FeltWasher
Grease
fitting
(Lub_cate
thegear
boxwith
{Oilthe line
shaftbeforestorageand
Lubriplate aftercleaning,if themini
GRd32 tiller/cultivatorisflushed
withwater)
View of Left Side With Tines Removed
Loading ...
Loading ...
Loading ...