Loading ...
INSTALLATION AND OPERATION INSTRUCTIONS
INSTALLATION
Gently remove all parts from the package and lay them out on a smooth surface.
IMPORTANT: Ensure your solar panel is placed where it is exposed to optimized sunlight. Be aware of objects such as trees or property overhangs
that may impede the panel’s ability to generate a charge.
Recommended installation height: 6.5 -10 feet above the ground.
At such a height, adjust motion sensor's angle by following illustrations below. The fixture will provide a detection distance of up to 45 feet (Max) at
77 degrees Fahrenheit.
The sensor will be more sensitive to motion across than motion towards it directly.
FEATURES:
Motion sensor: At night, turns light ON automatically when motion is detected and turns light OFF automatically when motion stops.
• Adjustable motion sensor
• Adjustable time and sensitivity settings
• Solar panel with 15 ft wire
Sensor Range: Up to 13.5 m / 45 ft. x 180 degree spread (Varies with various environment).
Lumens output: 1,000 lumens / 5,000K (Max, full charging).
PREPARATION: Tools required for assembly (not included): Phillips screwdriver, safety goggles, power drill and ladder.
1. Use a power drill (not included)
to create the holes on your chosen
mounting surface.
Use 4 of the included anchors and
screws to fasten the solar panel to
the surface.
2. Use a power drill (not included) to
drill the holes on your chosen mounting
surface.
Place the mounting plate over the
holes & use 2 of the included anchors
and screws to fasten the mounting
plate to the surface.
3. Slide light fixture back onto the
mounting plate to secure.
4. Installation completed.
5. Connect the wire from the solar
panel into the socket located under the
light fixture. Your solar motion light will
now begin to charge.
6. SENSOR HEAD ADJUSTMENT:
After installation, aim sensor head
toward desired detection area and
make sure sensor head is positioned
with controls facing toward the
ground.
2
Loading ...
Loading ...