Loading ...
Loading ...
Loading ...
, p i i,,,, J _ ...... _ .... : =_ _ _ _.................... _ .....................
LY
TO ASSEMBLE AND ATTACH GRASS
CATCHER (See Figs. 3A thru 4)
o Insert leg of tubular frame through front opening of
grass catcher and thread frame into sewn hem of bag.
NOTE: Keep bag hem gathered on the straight leg of the
tubular frame.
o When frame comes out the other end of sewn hem,
immediately work the end of frame down inside the bag
as shown in inset.
• StJde sewn hem evenly around the tubular frame until
both ends of frame are exposed out of the front open-
ing.
• Assemble lower frame to tubular frame as shown. Be
sure handle is outside of bag and frames are fully
seated as shown in inset.
= Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold them in warm
water for a few minutes. If bag gets wet, let it dry before
using.
• Closethe fliplid. Flip lid must be closed while operating
lawn mower.
- Lift the rear door on the mower housing and place the
grass catcher frame onto the formed tabs on the rear
door hinge bracket.
• The grass catcher is secured to the lawn mower
housing when.the, rear door is lowered onto the grass
catcher frame.
SEWN HEM
L L
r ' ' I ' _ _,,nnnr L
CAUTION: Do not run your lawn mower
without clipping deflector or approved
grass catcher in place. Never attempt
to operate the lawn mower with the rear
door removed or propped open,
i rl i, j L
TUBULAR FRAME SEWN
FLIP LID
LOWER
FRAME
(Frames must
be fulty seated)
TUBULAR
FRAME
FIG, 3B
LOWER FRAME HANDLE
\
BRACKET
FIG. 3C
REAR DOOR
GRASS
CATCHER
FRAME
FORMED
TABS
FIG. 4
FIG. 3A
7
Loading ...
Loading ...
Loading ...