Loading ...
Loading ...
Loading ...
8
1. Remove the filter.
2. Remove the front cover to expose the front vents. Do not remove the top
120mm outlet cover.
3. Make sure that internal switches are in recirculating position. (see above)
4. Drill 4 fixing holes as per the drawing.Ensure that access has been allowed for
the power cable and plug.
5. Hold the cooker hood in place and screw it to the underside of the cabinet. Ensure
that you do not damage the wiring during installation.
6. Re-install filter.
7. Plug in the power to the unit, turn on and test.
Notice
：When the rangehood is re-circulating, carbon filters should be installed. This
unit needs to be pre-installed with a carbon filter.
WARNING:
For safety reason, please use only the same
size of fixing or mounting screw which are
recommended in this instruction manual.
Failure to install the screws or fixing device in
accordance with these instructions may result in
electrical hazards.
Start Using Your Cooker Hood
Toggle switch
1.Lamp – Turn on/off light
“O” – to switch off light
“I” – to switch on light
Power – Slide out drawer, power on; slide in drawer, power off.
Loading ...
Loading ...
Loading ...