Loading ...
Loading ...
Loading ...
12
down the junction box cover(If there is wire pressing plate which pressed the light
wire, the wire pressing plate needs to be dismantled first).See pic 1.
Find out the terminal of the light connecting wire and pull it out. See pic 2.
Use a tool or the hand to press the spring splinterof both sides of LED light to the
inside, until the light is pressed out, then slightly pull the light connecting wire out.
See pic 3.
Apply the reverse procedure to install the light back.
• ILCOS D code for this lamp is: DBR-1.5/65-H-64
– LED modules– round lamp
– Max wattage: 2×1.5 W
– Voltage range: AC 220-240V
– Dimensions:
ENVIRONMENTAL PROTECTION:
This product is marked with the symbol on the selective sorting of
waste electronic equipment. This means that this product must not
be disposed of with household waste but must be supported by a
system of selective collection in accordance with Directive
2012/19/EU. It will then be recycled or dismantled to minimize
impacts on the environment, electrical and electronic products are
potentially dangerous for the environment and human health due to
the presence of hazardous substances.For more information, please
contact your local or regional authorities.
NOTE:
The following shows how to reduce total environmental impact (e.g. energy use) of the
cooking process).
(1) Install the cooker hood in a proper place where there is efficient ventilation.
(2) Clean the cooker hood regularly so as not to block the airway.
(3) Remember to switch off the cooker hood light after cooking.
Loading ...
Loading ...