Loading ...
Loading ...
Loading ...
Frequently Asked Questions
101
Water intake fault
Problem Possible cause and solution
The alarm tone is
sounding.
One of the following
messages appears in
the display:
Open the water supply The water supply is turned off.
Open the water supply all the way.
Insufficient water. Open
the water supply all the way.
Refer to Operating Instruc-
tions if necessary
Before remedying the fault:
Turn off the dishwasher.
Water-intake fault.
Open the shut-off valve all the way and start the
program again.
Clean the water-intake filter (see “Cleaning the wa-
ter-intake filter” under “Cleaning and care”).
The water-connection pressure is lower than
7.25psi (50kPa).
Seek professional advice.
The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Water drainage” under “Installa-
tion”).
Fault F 18: A technical
fault has occurred. Turn off
the appliance, close the wa-
ter supply and contact Miele
Service.
A technical fault has occurred.
Turn off the dishwasher.
Close the shut-off valve.
Contact Miele Customer Service.
The following fault mes-
sage appears during the
EnergySaver program:
Intake temperature too low
The intake water has not reached the required tem-
perature of 115°F (45°C) (see “Water intake” under
“Installation”).
Start the program again.
If the fault message appears again, select a differ-
ent program.
Loading ...
Loading ...
Loading ...