Loading ...
Loading ...
Loading ...
Trim kits and decorator panels.
For CustomStglg" models
Read these instructions completely and carefully.
Before You Begin
Some models ore equipped with trim kits that allow you to install door ponds. You con order
pre-cut block, white, bisque or stainless steel decorator ponds from GE Ports and Accessories,
800.626.2002, or you can odd wood ponds to match your kitchen cabinets.
Panels less than ]/4" (6 mm) thick
When installing wood panels less than 1/4" (6 mm) thick, you need to create a filler panel, such as 1/8"
cardboard, that will fit between the face of the door and the wood panel. If you are installing the pre-cut
decorator panels, pre-cut filler panels are included in the kit. The combined thickness of the decorator
or wood panel and the filler panel should be 1/4" (6 mm).
Panels 1/4"thick or less
i/4"max
3/4" (19 mm) or Raised Panel
A raised panel design screwed or glued to a 1/4" (6mm) thick backing, or a 3/4" (19 mm) routed board can
be used. The raised portion of the panel must be fabricated to permit clearances of at least 2" (5.1cm) from
the handle side for fingertip clearance.
Panelsthicker than 1/4" (6mm), up to 3/4" (19mm) max, will require that the outer 5/16" (8mm) of panel
perimeter be no thicker than 1/4" (6 mm).
Weight limitations for custom panels:
FreshFood 38 Ibs.(17 kg) max.
FreezerDoor 28 Ibs.(13 kg) max.
Panelsthicker than i/4"{6 mm)
i14"(6turn)
Thick Backing
5/16" (8 mm)
1/4" (6 mm) max
3/4"(19mm)
2" (5.1 cm)
Clearance
Handle Side
Appearance
Panel
'4"
(19mm)
Refrigerator
Door
17
O"
@
I.Q
0
m
v
0
0
I.Q
w
_._
"0
"0
0
Loading ...
Loading ...
Loading ...