American Outdoor Grill 30NCL00SP 56 Inch Freestanding Gas Gr

User Manual - Page 3

For 30NCL00SP.

PDF File Manual, 34 pages, Read Online | Download pdf file

Loading ...
Loading ...
3
TABLE OF CONTENTS
REV 0 - 1412011100
L-C2-438
To protect against electric shock, do not immerse cord or plugs in water or other liquid;
Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts;
Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance malfunctions
or has been damaged in any manner. Contact the manufacturer for repair;
Do not let the cord hang over the edge of a table or touch hot surfaces;
Do not use an outdoor cooking gas appliance for purposes other than intended;
When connecting, fi rst connect plug to the outdoor cooking gas appliance then plug appliance into the outlet;
Use only a Ground Fault Circuit Interrupter (GFCI) protected receptacle with this outdoor cooking gas appliance;
Never remove the grounding plug or use with an adapter of 2 prongs.
Use only extension cords with a 3 prong grounding plug, rated for the power of the equipment, and approved for
outdoor use with a W-A marking.
ELECTRICAL SAFETY
1 WARNINGS AND SAFETY CODES
3 ELECTRICAL SAFETY
4 PARTS LIST
6 MODEL SPECIFICATIONS
6 BUILT-IN GRILL WIRING DIAGRAM*
7 STAND-ALONE GRILL DIMENSIONS TABLE
8 GRILL MAINTENANCE AND SAFETY INFORMATION
8 ELECTRICAL CONNECTIONS
8 LIGHT SWITCH
9 INSTALLATION REQUIREMENTS
10 ENSURE PROPER COMBUSTION AIR AND COOLING AIRFLOW
10 EXHAUST REMOVAL
11 INSTALLATION
11 LOCATION PREPARATION
11 WHEELS AND CASTERS
11 CONNECT THE GAS SUPPLY
13 INSTALL THE SIDEBURNER SHELF (IF EQUIPPED)
14 RIGID SHELF INSTALLATION
15 SAFE USE & MAINTENANCE OF PROPANE GAS CYLINDERS
17 IDENTIFICATION OF GRILL CONTROLS
19 LIGHTING (IGNITION) INSTRUCTIONS
19 ELECTRONIC LIGHTING
19 SHUTTING OFF THE UNIT
20 OPTIONAL INFRARED BURNER OPERATION
21 ROTISSERIE INSTRUCTIONS (IF EQUIPPED)
22 ACCESSORIES
22 THE VAPORIZER PANEL(S)
23 DRIP TRAY
24 CARE & CLEANING
25 REPLACING HALOGEN BULBS
26 CHECKING AND CONVERTING GAS TYPE
26 CHECKING AND CONVERTING THE REGULATOR (IF APPLICABLE)
27 CHECKING/CONVERTING THE BURNER ORIFICES
30 SIDEBURNER ORIFICE SIZE CHECKING/CONVERSION (IF EQUIPPED)
30 SIDEBURNER AIR SHUTTER ADJUSTMENT (IF EQUIPPED)
31 CONTROL PANEL REMOVAL
32 NOTES PAGE
33 TROUBLESHOOTING
34 WARRANTY
Loading ...
Loading ...
Loading ...