Loading ...
Loading ...
Loading ...
Page 13 of 18
Propane Gas – Fully Open
ALTITUDE ADJUSTMENT
All valves have been pre-set and certified for installation at elevations from 0 - 4000 feet (0 -1219.2m)
above sea level.
When installing this unit at higher elevations, it is necessary to decrease the input rating by replacing
the existing burner orifice with a smaller size for installations over 4000 feet (1219.2 m). The
appliances input should be reduced 4% for each additional 1000 feet (305m) above sea level. For
the USA, de-rate the unit from sea level according to the gas installation code.
FIELD ASSEMBLED PARTS
Your outdoor fireplace comes fully assembled, to finish assembling the unit you must do the following:
1. Install rock and glass.
2. Connect the gas supply.
ROCK & GLASS INSTALLATION / ROCK & VERRE D'INSTALLATION
Step 1.
Sprinkle burner channel with glass. Make sure to cover the burner pan evenly. Then add decorative
rocks to outer pan area. / Saupoudrer le canal du brûleur avec verre. Assurez-vous de couvrir la
casserole du brûleur de façon égale. Puis ajoutez les roches décoratives à la zone pan extérieur.
Step 2
Make sure that only the glass covers the burner holes. / Assurez-vous que seul le verre recouvre les
trous du brûleur.
Turn your fireplace on and wait approximately 10-15 minutes until the flames are a nice yellow colour.
Note the flame pattern and in any low or high areas adjust the amount of river glass to correct gas
flow. / Transformez votre cheminée et attendez environ 10-15 minutes jusqu'à ce que les flammes
sont une belle couleur jaune. Notez la forme de la flamme et dans tous les domaines à basse ou
haute ajuster la quantité de verre rivière pour corriger débit de gaz.
Loading ...
Loading ...
Loading ...