Loading ...
Loading ...
Loading ...
Before you call for service...
Washer Performance Possible Causes What to do
Result of normal wear on
While this is not caused by the washer, you can slow the pilling
Pilling poly-cotton blends and
fuzzy fabrics process by washing garments inside out.
Snags, holes, tears,
rips or excessive wear
Wrinkling
Pins, snaps, hooks, sharp
buttons, belt buckles,
zippers and sharp objects
left in pockets
Undiluted chlorine bleach
Chemicals like hair bleach
or dye, permanent wave
solution
Improper sorting
Fasten snaps, hooks, buttons and zippers.
Remove loose items like pins, objects in pockets and sharp buttons.
Turn knits (which snag easily)inside out.
Check bleach package instructions for proper amount.
Never add undiluted bleach to wash or allow clothes to
come in contact with undiluted bleach.
Repeated washing in water
that is too hot
Rinse items that may have chemicals on them before washing.
Avoid mixing heavy items (like work clothes) with light items (like
blouses).
Try a fabric softener.
Overloading or incorrect Load your washer so clothes have enough room to move freely with
water level water covering all of the clothes.
Incorrect wash and dry Match Cycle selection to the type of fabric you are washing
cycles (especially for easy care loads).
Wash in warm or cold water.
Washer Soounds Possible Causes What to do
"Metallic clicking" Shifter mechanism is The drive system will engage at the start of agitate and disengage
engaging or disengaging when agitate is complete. This occurs multiple times during the wash.
Back and forth
"swoash" or light Electric motor reversing This machine has a drive system that doesn't use gears. This sound is
"clicking" sound during direction the motor rotating back and forth to agitate your laundry.
agitate
Quick short agitation Clothing redistribution At the end of agitate, the motor makes short agitation strokes to
sounds at end of agitate redistribute the load.
"Click" when water Relay switch The relay makes a click sound when activated. The water level acti-
stops filling vates the relay and stops filling.
"Clicking" behind Can- Automatic Temperature This valve mixes in cold and hot water. The "clicking" is the valve turn-
tral Panel during fill Control Valve ing on and off.
Water volume changes Automatic Temperature This valve mixes in cold and hot water. The sound changes when the
during fill Control Valve valves are turned on and off.
Motor "whining up"
or "coasting down" in Motor ramping up/down The motor will speed up incrementally during the spin cycle. When
spin during spin cycle spin is complete, it will coast until it stops.
"Humming" Water drain pump The drain pump will make a humming sound when pumping out wa-
ter after agitation stops and continue until spin is complete.
"Gurgling" Water drain pump
When the pump starts drawing in air, It starts to gurgle. The washer
should then begin spinning and the sound will continue until it is
done spinning.
16
Loading ...
Loading ...
Loading ...