Loading ...
Loading ...
Loading ...
Page 12
Operating
Instructions
Additional Information
Now that you have mastered the operating procedure, here are more features in your
control that you should become familiar with.
• The Cool circuit has an automatic 3 minute time delayed start if the unit is turned
off and on quickly. This prevents overheating of the compressor and possible circuit
breaker tripping.
• The fan will continue to run during this time.
• The control will maintain any set temperature within 1°F/1°C, between 62°F (17°C)
and 86°F (30°C).
• The control can display temperature in Fahrenheit or Celsius.
• To convert from one to the other, press and hold the left (
-
) or right (
+
) Temp/Timer
buttons at the same time, for 3 seconds.
The Fresh Air Vent allows the air conditioner to:
1. Recirculate inside air – Vent Closed (See Fig. A)
2. Draw fresh air into the room - Vent Open (See Fig. B)
3. Exchange air from the room and draws fresh air into the room - Vent and Exhaust
Open (See Fig. C).
Fresh Air Vent Control (for 10000 BTU/h and 12000 BTU/h)
Air Directional Louvers
The louvers will allow you to direct the air flow up or
down and lefft or right throughout the room as needed.
Pivot horizontal louvers until the desired up/down
direction is obtained.
Move the levers from side to side until the desired
left/right direction is obtained.
Air direction
Louvers
Fig. A (VENT CLOSED)
Fig. B (VENT OPEN) Fig. C (VENT & EXHAUST OPEN)
Loading ...
Loading ...
Loading ...