Loading ...
Loading ...
Loading ...
DOOR REMOVAL (UPRIGHT MODELS}
If door must be removed:
1, GentUyUayfreezer on its back, on a rug or bUanket,
2, Remove two base screws and base panel Remove
wire from dips on bottom of cabinet, (Figure 1)
3, UnpUugconnector by hoUdingthe cabinet connector in
pUace,and pulling door connector out, (Figure 1)
4, Remove bottom hinge screws, (Figure 1)
5, Remove pUastictop hinge cover,
6, Remove screws from top hinge,
7, Remove top hinge from cabinet,
8, Remove doorand bottom hinge from cabinet,
9, To repUacedoor, reverse the above order and manner of
removal SecureUytighten aHscrews to prevent hinge
slippage,
Base
Panel Base Panel Screws
Hinge Screws
Cabinet Connector
Figure 1
tOE MAKER iNSTALLATiON
If your Freezer has an automatic ice maker, please refer to
the two inserts in the bond pack that came with your
Freezer (1, Installation Instructions &2, Installation -
Connecting Ice Maker to Water Supply) to correctly hook-up
your ice maker,
Cold Control
o The freezer should be located in the coolest area of the
room, away from heat producing appliances or heating
ducts, and out of direct sunlight,
o Let hot foods cool to room temperature before placing in
the freezer, Overloading the freezer forces the compres-
sor to run longer, Foods that freeze too slowly may spoil
or lose quality,
Be sure to wrap foods properly; and wipe containers dry
before placing them in the freezer, This cuts down on
frost build-up inside the freezer,
Freezer shelves should not be lined with aluminum foil,
wax paper, or paper toweling, Liners interfere with cold
air circulation, making the freezer less efficient,
o Organize and label food to reduce door openings and
extended searches, Remove as many items as needed
at one time, and close the door as soon as possible,
COOL DOWN PERIOD
For safe food storage, allow 4 hours for the freezer to
cool down completely, The freezer will run continuously
for the first several hours, Foods that are already frozen
may be placed in the freezer after the first few hours of
operation, Unfrozen foods should NOT be loaded into
the freezer until the freezer has operated for 4 hours,
When loading the freezer, freeze only 3 pounds of
fresh food per cubic foot of freezer space at one time,
Distribute packages to be frozen evenly throughout the
freezer, it is not necessary to turn the control knob to a
colder setting while freezing food,
TEMPERATURE CONTROL
The temperature control is located inside the freezer on
upright models, The temperature is factory preset to provide
satisfactory food storage temperatures, However, the
temperature control is adjustable to provide a range of
temperatures for your personal satisfaction, if a colder
temperature is desired, turn the temperature control knob
toward COLDEST and allow several hours for temperatures
to stabilize between adjustments,
Loading ...
Loading ...
Loading ...