Loading ...
Loading ...
Loading ...
3,
4,
5,
6.
7,
Connect ground wire (green or bare) of power supply cable to external ground conductor
screw. Tighten screw.
A
A. Ext_'rnal ground conductor scr_'w
B. C_nter silver-color_'d t_'rminal block screw
C. Neutral wir_' (white' or center wir_')
D. V_" (1.9 cm) UL li_t_'d strain r_'lief
E. Ground wire (gr_,en ot bare) of power supply cable
F. Neutral ground wire
Place the hooked ends of the other power supply cable wires under the outer terminal
block screws (hooks facing right). Squeeze hooked ends togethen Tighten screws.
!! !!
Tighten strain relief screws.
Insert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-
down screw,
You have completed your electrical connections. Now go to "Venting Requirements."
3-wire connection: Power Supply Cord
Use where local codes permit connecting cabinet-ground conductor to neutral wire:
A ........ _!
C G F
2.
A. 3-wire receptacle" (NEMA type lO-30R)
B. 3-wire plug
C. Neutral proiig
D. Spade tenTdnah with up turned ench
E. _" (1.9 cm) U[ listed strain relief
L Ring terminals
G. Neutral (white" or center wir_')
[oosen or remove center silver-colored terminal block screw.
Connect neutral wire (white or center wire) of power supply cord to the center, silver-
colored terminal screw of the terminal block. Tighten screw.
B C
E
3_
4.
5.
6.
A. Neutral ground wire
B. [xtemal ground conductor 5cre'w
C. Ce'nter silver-colored terminal block screw
D. Neutral wir_' (white or centt'r wire)
E. _" ( 1.9 cm) UL listed strain relief
Connect the other wires to outer terminal block screws. Tighten screws.
Tighten strain relief screws.
Insert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-
down screw.
You have completed your electrical connections. Now go to "Venting Requirements."
Loading ...
Loading ...
Loading ...