Loading ...
Loading ...
Loading ...
caster/caster foot assembly
1. Turn the dust drum upside down on the floor.
2. Insert the caster feet into the bottom of drum, as
shown. (4 places)
3. Push on the caster foot until the foot is flush with
bottom of the dust drum.
4. Insert the caster stem into the socket of the caster
foot, as shown. (4 places)
5. Push on the caster until the ball on the caster stem
is inserted all the way into the socket. You will be
able to hear the ball snap into the socket and the
caster will swivel easily when positioning is correct.
6. Turn the drum upright.
NOTE: If your casters are noisy you may put a drop of
oil on the roller shaft to make them quieter.
CASTER STEM
CASTER
SOCKE1
CASTER
FOOT
HOLE
CASTER
PIN
NOTE: If the occasion should arise the hose adaptor
can be removed from the hose. This could be done by
a twisting and pulling action of the adaptor from the
hose.
HOSE
ADAPTER HOSE
vac assembly
1. Line up diverter of top portion of vac with the vacuum
inlet of the dust drum.
2. The handles with flexible latches inside are to be
positioned to the locking tabs on the drum. Press
down on the handles until the flexible latches snap
onto the tabs on the drum.
NOTE: Latches will not snap on if top portion of vac
assembly is on backwards.
3. Push flexible end into vacuum inlet of dust drum.
4. Put retangular nozzle onto end of hose.
FLEXIBLE
LATCHES
TOP
HANDLE
LOCKING
TAB
DIVERTER
DUST DRUM
INLET
Loading ...
Loading ...
Loading ...