Loading ...
Loading ...
Loading ...
fimter assembmy
1, Carefully put the filter onto the cage by sliding it over
the lip covering the 3 slots until it rests on the shoul-
der.
2. Place the hole of the filter plate over threaded screw
of the cage.
3. Gently push on the filter plate in order for the rubber
ring of the filter to seat inside the circular channel
of the filter plate.
4. Place filter nut onto threaded screw and tighten it
down. Finger tight only.
NOTE: Lever of nut should be away from plate as
shown.
CAUTION: Do not overtighten as this will cause
deformation or cracks in the filter plate or cage.
Nut lever should be away from plate.
q
I
PLATE
CAGE
Loading ...
Loading ...
Loading ...