Loading ...
Loading ...
Loading ...
Steps for hstaHation
o Select a away suitable location for the washer on a hard even surface
from direct sunlight or heat source e,g, radiators, base board heaters,
cooking appliances etc,Any floor unevenness should be corrected with
the leveling legs located on the bottom corners of the washer,The
washer must be placed at room temperature,You must not place washer
where the temperature isat below freezing,
installing Your Washer:
Read through these instructions carefully before installation,
1,Connect the hot and cold water inlet hosesto the hot and cold water
faucet,
Cold water inlethose
'\
\\\\ i
Hot water inlet hose
2, Connect the other end to the corresponding washer inlet located at the
back of machine,
H
Note: You may have to usepliersto tighten the coupling, Do not over tighten
because you may cause damage to the valve,
You should usethe new hose-setssupplied with the washer, Old
hose-setsshould not be reused,
16
Loading ...
Loading ...