Blomberg WM98400SX User Manual

Loading ...

62 / English

Front-Loading Automatic Washer

8 Troubleshooting

Problem Reason Solution

A program

cannot be

started or

selected.

The product may have

switched to self protection

mode due to a supply problem

(line voltage, water pressure,

etc.).

* PressandholdtheOn/

Off button for 3 seconds to

reset the product to factory

settings.(See"Cancelingthe

program")

There is water

inside the

product.

Some water might have

remained in the product due to

the quality control processes

in the production.

* This is not a failure; water is

not harmful to the product.

Washer does not

fill with water or

wash after the

program was

selected and the

“Start/Pause/

Cancel” button

was pressed.

Faucets may be turned off. * Open the water faucets fully.

Water inlet hose may be

folded.

* Check the water inlet hose

and straighten if necessary.

Water inlet strainers might be

clogged.

* Clean the water inlet

strainers.

Is there power at the outlet?

* Call an electrician and have

the power outlet / circuit

breaker / fuse checked.

Washer might be unplugged.

* Plugthepowercordtoalive

electrical outlet.

Drain hose may be folded.

* Check the drain hose and

straighten if necessary.

Washer may be in handwash,

wools or soak cycle.

* Wait for a short time and

tumbling will start.

Drain pump filter or drain itself

may be clogged.

* Clean the drain pump filter

(See “User maintenance

instructions” ). If the house

drain pipes are clogged, call

a plumber for assistance.

Door may not be closed

properly.

* Close the loading door.

Washer does

not drain water

/ Washer drains

water slowly.

Drain hose may be folded. * Check the drain hose and