Loading ...
Loading ...
Loading ...
OWNER'SRESPONSiBiLiTiES
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverseconditions noted below.
iiiiiiiiiiiiiiiiiiiiiiii_iiiii_iiiiiiiJii!iiiiiiiiiiiiJiJiiiiiiiiiiiiiJiiJiiiHH_iiiJiiiiiii_iiiii!iii_ii_iii_:_:_iiiiW_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
• Changeengine oil
• Check/clean water inlet screen'
* Check high pressure hose
* Check detergentsiphoning hoses
, Check spray gun and assembly for leaks
, Cleandebris
, Check engine oil level
f
, Cleanengine air cleaner_
, Changeengine oil_
, inspect muffler and spark arrester
iiiiii J
, Replace engine air cleaner_
, Replace spark plug
, Cleancooling system_
Clean if clogged. Replace if perforated or torn.
2Service more often under dirty or dusty conditions.
GeneralRecommendations
Regular maintenance will improve the performance and
extendthe life of the pressurewasher. See any Sears or
other qualified service dealerfor service.
The pressure washer warranty does not cover items that
have beensubjected to operator abuse or negligence.To
receivefull value from the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detailed in Storage.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedule chart above.
NOTICE Oncea year you should clean or replace the spark
plug and replace the air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last longer.
Pump Oil
DO NOTattempt any oil maintenance on this pump. The
pump is pre-iubricated and sealedfrom the factory, requiring
no additional maintenancefor the life of the pump.
EmissionsControl
Maintenance,replacement, or repair of the emissions
controldevices and systemsmay be performed by any non-
road engine repair establishment or individual. However,
to obtain "no charge" emissions control service, the work
must be performed by a factory authorized dealer. Seethe
Emissions Warranty.
Before EachUse
1. Checkengine oil level.
2. Cleandebris.
3. Checkwater inlet screenfor damage.
4. Checkhigh pressure hose for leaks.
5. Checkgun and nozzle extension assemblyfor leaks.
6. Purge pump of air and contaminants.
PRESSUREWASHERMAINTENANCE
Clean Debris
Daily or before use, clean accumulated debris from pressure
washer. Keeplinkage, spring and controls clean. Keep area
around and behind muffler free from any combustible debris.
inspect cooling air slots and openings on the pressure
washer. Theseopenings must be kept clean and
unobstructed.
Pressurewasher parts should be kept clean to reduce the
risk of overheating and ignition of accumulated debris.
• Usea damp cloth to wipe exterior surfaces clean.
NOTICE improper treatment of pressurewasher can
damage it and shorten its life.
• DONOTinsertanyobjectsthroughcoolingslots.
• Usea soft bristle brush to loosen caked on dirt, oil, etc.
• Usea vacuum cleaner to pick up loose dirt and debris.
Checkand Clean Inlet Screen
Examinegarden hose inlet screen. Cleanif it is clogged or
replace if it is torn.
CheckHigh Pressure Hose
High pressure hoses can develop leaksfrom wear, kinking,
or abuse, inspect hose before each use. Check for cuts,
leaks, abrasions, bulging of cover, or damage or movement
of couplings. If any of these conditions exist, replace hose
immediately.
_lLWARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
, NEVERrepairhigh pressurehose.Replaceit.
• ReplacementhoseratingMUSTexceedmaximumpressure
ratingof unit.
17
Loading ...
Loading ...
Loading ...