AAP240 User Manual

Loading ...

Airo 6 AirPurierOIM

IMPORTANT

Beforeoperatingthisapplianceensureselectingaatandlevellocationfortheairpurier.

Ensureaminimumclearanceof300mmfromwallsorotheritems.

Ensuretheairinletandoutletsarenotblocked.

Plugtheapplianceintoapoweroutletandturnthepoweroutleton.Oncepowerisconnectedasinglebeepwill

beheard.

Dismantle the multifunctional filter Install the multifunctional filter

(1) Remove the front panel (1) Install the multifunctional filter (the side

with the drawstring will face outward).

(1) Attach the front panel to the device until

the panel fits into the bottom frame.

Step 1:

To grasp the front panel,

open the front panel

outward.

Step 2:

Pull front panel upward.

Step 3:

Remove the front panel.

(2) Take out the multifunction filter from

the unit

(3) Take out the multifunction filter from the

plastic bag.

NOTE

Since the multifunction filter is a consumable,

it is not covered in the warranty period of the

Air Purifier unit. Please make sure the

multifunctional filter is in good conditions

before removing the protective bag.

NOTE

Please do not operate the Air Purifier unit

when all multifunctional filters have not been

installed.

4 5

Step 1:

Hang the front panel into

position.

Step 2:

Clasp the front panel inward

buckle until the bottom of the front

panel and are in position.

Finally, press the position and

to make sure the front panel

fits into the Air Purifier correctly

(as shown ih the enlarged figure).

PREPARATION

Loading ...

User Manual - Page 6