Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
REGULAR SERVICE €l_'y
T interkx_s_t_s I/
R C_ck _ Loo_ Famners IV" Ill'7 V'
A Shmpen/Replace Mower Blades _4
T Lu_-, _
0 _k Ba_l_ I._vel
R C_n Battew and Termlnals/Recharge I_
Check Transaxle Cooling t_'
Adjust BladeBelt(s)Tension k/'s
v',
AdjuSt Motion Drive Belt(s) Tension
Check Engine OH Level _ V e
_a,_e Eugineoil Wry.: i t/
E Clean Air Filter
N Clean Air Screen
Inspect Muffler/Spark An'ester V p
Replace Oil Filter (If equipped) . _.:
N Clean Engine C°°ltng Firm _=
Replace Spark Plug V'
Replace Air Filter Paper Cartridge I_=
Replace Fuel Filter I_
1 .Ct_mo_whenopefalklgunderlheevytoad_lnhlghll_teffiperJtufee. 5-ifequlppedwib_mdJ_l_tstlflt.
2. Service rno_e oflam when operaUng In dirty or d_ condltlons.
3. If iqulpMd w_l oil Mot, ¢;11@ ol ivlfy 50 hcJtl.
4. R_ blad_ n-o_ often when r_ In slu_ly sol.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual. Some
adjustments will need to be made periodi-
cally to properly maintain your tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you shoul d replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and intedock
p_stems for proper operation.
• Check for loose fasteners.
e - Not r_qu_KI ff _qukopedwithm_lntenence-free b_tte_y.
7 - Tighten frontsxle pWotbott to 35 ft.Jbe,mexlmtml.
0o r_t ow_um.
LUBRICATION CHART
eS
Zerk Zerk
Wheel
@ FrontWheel
Bearing
Beadng Zerk Zerk
OAttachment
Clutch
• SAE 30 or 10w30 Motor OIL
• General Purpose Grease
@ Refer to Maintenance "Engine"Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bear-ings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating
bearings. If you feel they must be. lubricated,
use only .adry, powdered graphde type lubri-
cant spanngly.
18
Loading ...
Loading ...
Loading ...