Loading ...
Loading ...
Loading ...
8.1 Unpacking
Take the appliance out of the packaging.
Remove all packaging materials.
8.2 Environmental conditions
the temperature inside the appliance and its energy consumption. Do not install the appli
ance near other heat-emitting appliances (ovens, refrigerators) without isolation.
8.3 Space requirements
Required space to open the door (Fig. 8.1):
Width
in mm
Depth
in mm
Distance to wall
in mm
W1 W2 D1 D2 D3 D4
705 1076 603 1243 1327 50
safety reasons, the information of the required ventila
tion cross sections must be observed (Fig. 8.2).
8.5 Aligning the appliance
The appliance should be placed on a at and solid sur
face. If the appliance is placed on a pedestal, strong and
foam packing material as a pedestal.
1. Tilt the appliance slightly backwards (Fig. 8.3).
2. Set the feet to the desired level.
3. The stability can be checked by alternately bump
ing on the diagonals. The slight swaying should be
the same in both directions. Otherwise the frame
can warp; possible leaking door seals are the result.
A low tendency to the rear eases the closing of the
door.
W2
D1
D3
D2
W1
D4
8.1
5 cm
5 cm
5 cm
5 cm
8.1
PD[e
8.3
23
EN
8 - Installation
Ventilation cross-section8
Loading ...
Loading ...
Loading ...