Loading ...
Loading ...
Loading ...
page 5
6. Fan Assembly.
Remove motor assembly from j-hook on
hanging bracket. Lift motor assembly to
hanging bracket and carefully push
wiring and wire connectors into outlet
box. Align holes in top of motor assembly
with bolts in hanging bracket and push
up so that bolts come through holes.
Secure motor assembly with flat washers
and motor mounting nuts that were
previously removed, page 3, step 4.
WARNING: It is extremely important to
tighten motor mounting nuts completely
so that fan is mounted securely.
hanging
bracket
motor
mounting
nuts and flat
washers
motor assembly
motor
mounting
nuts and
flat washers
j-hook
7. Motor Housing Assembly.
Temporarily raise motor housing to
hanging bracket to determine which
2 screws in hanging bracket align with
slotted holes on top rim of motor
housing. Lower motor housing and
partially loosen the 2 screws in the
hanging bracket that correspond to
slotted holes in the motor housing.
Remove the other 2 screws from the
hanging bracket.
Now, raise motor housing to hanging
bracket again, allowing slotted holes in
motor housing to align with loosened
screws in hanging bracket. Twist motor
housing to lock. Re-insert the 2 screws
that were previously removed and then
tighten all screws to secure motor
housing.
motor
housing
screws
motor
housing
screws
motor
housing
hanging
bracket
Loading ...
Loading ...
Loading ...