Loading ...
Loading ...
Loading ...
30
SPECIAL ATTENTION
Your new styling brush is designed with a protective coating around the heating coils.
When plugged in and operating for the first time, there may be a little momentary smoking
and slight odour. This represents no danger to the user and does not indicate a defect in
your styling brush. When using for the first time, allow it to continue running until the smoke
dissipates. The smoking and odour will disappear after you have used the device several
times. The heating plate surface of this styling brush is painted with tourmaline. Tourmaline
is made from 100% crushed tourmaline mineral. A precious stone, tourmaline is the world’s
finest ionic and infrared generator. Tourmaline naturally and constantly emits negative ions
and infrared heat which impart great benefits to hair when using.
Benefits: Silky, shine. Negative ions close the cuticle layer to create a smooth, shiny hair
surface and to lock in hair’s own natural moisture.
PARTS DESCRIPTION
1. On / off and temperature adjustment button
2. Swivel power cord
3. Heating plate
4. Digital display
5. Handle
6. Hanging loop
TO USE
1. Plug in the appliance.
2. Press and hold the on / off and temperature adjustment button for approx. 3 seconds to
switch on the appliance. The appliance starts to heat up.
3. You can press on / off and temperature adjustment button again to adjust the temperature
from 120ºC-200ºC by 20ºC per press.
4. During heating up, the digital display will flash with the set temperature. When the set
temperature is reached, the digital display will stop flashing, then you can start to use the
appliance. Be careful not to touch the hot parts of the brush when using.
5. Comb through the hair with a standard hair brush or comb to make sure there are no
knots in the hair. Divide the hair up into sections. Move the styling brush through the hair.
Do not keep the brush for a longer period at the same place to avoid damaging your hair
Make sure you do not touch your scalp with the device! Repeat the process until you are
satisfied with the result.
6. After use, press and hold the on / off and temperature adjustment button for approx.
3 seconds to switch off the appliance, and then unplug it. Always remove the mains plug
from the plug socket when the device is not in use.
7. Allow hair to cool down.
NOTE:
1) Only suitable for use on dry hair.
2) The device has an automatic switch-off function. If the device is switched on for 60 minutes
without interruption, it switches off automatically.
3) The higher temperature setting, the faster you will get a sleek straightening result. When
working at the maximum temperature setting, you should not treat the same strand more
than once.
TO CLEAN
Unplug the appliance and allow it to cool down. Use a soft, slightly damp cloth to wipe
appliance surfaces. Do not allow water or any other liquid to get into the unit.
1
4
3
5
2
6
Loading ...
Loading ...
Loading ...