Loading ...
Loading ...
Loading ...
[
Other settings
• r
Making a recording
oo
m
Change this setting to listen to content recorded with Dolby Digital at low
volume (such as late at night) and maintain audio clarity. It reduces the
peak level in loud scenes without affecting the sound field.
OFF:The software is played with the original dynamic range (factory
setting).
STANDARD: The level recommended by the producer of the software
for household viewing.
MAX:The maximum allowable compression (recommended for night
viewing).
(_ Press [SFC MODE < and >] at the same time to enter
the setting mode.
(_ Press [SFC MODE <] to select "DR COMP".
_) Turn [INPUT SELECTOR[ to select "OFF", "STANDARD"
or "MAX".
Press [SFC MODE < and >] at the same time to exit the
setting mode.
The factory setting is OFF (normal brightness).
Dim the unit's display for better viewing in a darkened room
_) Press [SFC MODE < and >] at the same time to enter
the setting mode.
Press [SFC MODE <] to select "DIMMER".
(_ Turn [INPUT SELECTOR[ to select "OFF" or "ON".
(_ Press [SFC MODE < and >] at the same time to exit the
setting mode.
You can record to a tape deck connected to TAPE REC (OUT) or to a
VCR connected to VCR 1 OUT.
See the recording unit's operating instructions for details on how to
prepare it for recording.
When recording with a tape deck, you can record any source except
TAPE.
When recording with a VCR (connected VCR 1), you can record any
source except TAPE or VCR 1.
(_ Turn [INPUT SELECTOR[ to select the source to be
recorded.
(_) Begin recording.
Followyour recording unit's operating instructions.
(_) Start the source to be recorded.
Followyour equipmenrs operating instructions.
• You cannot record a source connected through a digital terminal
When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analog terminals and "ANALOG" input is
selected.
• When you select DVD 6CH INPUT mode, only sound from the front
left and right channels is recorded.
Using outdoor antennas
20 mm (25/32")
,I,
Shield braid
4
10 mm (3/8")
Core wire
/ _ FM outdoor antenna
Vinyl-coveredwire
FM outdoor antenna
• Disconnect the FM indoor antenna.
• The antenna should be instaged by a
competent technician.
• Twist the coaxial cable's shield braid firmly and
connect it to the GND terminal
AM outdoor antenna
• Run a piece of vinyl wire horizontally across a
window or other convenient location.
• Leave the loop antenna connected.
• Disconnect the antenna when the unit is not in
use. Do not use the antenna during an electrical
storm.
(16_,0 ft)
Loading ...
Loading ...
Loading ...