Loading ...
Loading ...
Loading ...
21
W415-0379 / E / 04.24.12
Attach and secure the variable speed switch
using the nut provided. Plug the harness cord
into the receptacle.The wire harness provided
in this kit is a universal harness. When installed,
ensure that any excess wire is contained,
preventing it from making contact with
moving or hot objects.
Because the blower is thermally activated,
when turned on, it will automatically start
approximately 10 minutes after lighting the
appliance and will run for approximately 30-45 minutes after the appliance has been turned off. Use of the fan
increases the output of heat. Drywall dust will penetrate into the blower bearings, causing irreparable damage.
Care must be taken to prevent drywall dust from coming into contact with the blower or its compartment. Any
damage resulting from this condition is not covered by the warranty policy.
VARIABLE
SPEED
KNOB
51.6
RECEPTACLE /
THERMAL SWITCH
GROUND
SCREW
JUNCTION BOX
Loading ...
Loading ...
Loading ...