Loading ...
Loading ...
Loading ...
11
10. Add fabric softener, if desired
During the nal rinse, wait until the washer has completed
lling and press START/PAUSE/CANCEL to pause the washer.
Lift the lid and add the measured, recommended amount of
liquid fabric softener. Do not use more than the recommended
amount. Close the lid and press START/PAUSE/CANCEL again
to start the washer. Always follow manufacturer’s directions for
correct amount of fabric softener based on your load size.
9. Press START/PAUSE/CANCEL
to begin wash cycle
Press START/PAUSE/CANCEL to start the wash cycle. When
the cycle has nished, the Cycle Complete progress light will
light. Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and avoid rusting of metal
hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to add one or two missed garments after the wash
has started, simply open the lid and this will pause the cycle.
After adding the garments, simply close the lid and the cycle
will resume. The washer may add some additional water to
offset the added garments.
If, instead, you press Start/Pause/Cancel to pause the cycle
and then open the lid to add garments, you will need to press
Start/Pause/Cancel after closing the lid to resume the cycle.
NOTE: Washer will not ll with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes, the
water will pump out automatically.
Manual soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press START/PAUSE/
CANCEL and leave the lid closed. Once your desired soak
time has elapsed, press START/PAUSE/CANCEL again to
continue the cycle. As long as the lid remains closed, your
soak time can be longer than 10 minutes. However, if the lid
is opened during the soak and remains open for more than
10 minutes, the water will pump out automatically.
Appearance
may vary
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of replacement
on the label with a permanent marker.
NOTE: This washer does not include inlet hoses. See the
Installation Instructions for more information.
WATER INLET HOSES
Washer Maintenance
WASHER CARE
Recommendations to Help Keep Your Washer Clean
and Performing at its Best
1. Always use High Ef ciency (HE) detergents and follow
the detergent manufacturer’s instructions regarding the
amount of detergent to use. Never use more than the
recommended amount because that may increase the
rate at which detergent and soil residue accumulate inside
your washer, which in turn may result in undesirable odor.
2. Use warm and hot wash water settings sometimes (not
exclusively cold-water washes) because they do a better
job of controlling the rate at which soils and detergent
accumulate.
3. Always leave the washer lid open between uses to help
dry out the washer and prevent the buildup of odor-
causing residue.
Cleaning Your Top Loading Washer
Read these instructions completely before beginning the
routine cleaning processes recommended below. This washer
maintenance procedure should be performed, at a minimum,
once per month or every 30 wash cycles, whichever occurs
sooner, to control the rate at which soils and detergent may
otherwise accumulate in your washer.
Cleaning the Inside of the Washer
To keep your washer odor-free, follow the usage instructions
provided above and use this recommended monthly cleaning
procedure:
Clean Washer Cycle
This washer has a special cycle that uses higher water
volumes in combination with affresh
®
Washer Cleaner or
liquid chlorine bleach to clean the inside of the washer.
Begin procedure
1. affresh
®
Washer Cleaner Cycle Procedure
(Recommended for Best Performance):
a. Open the washer lid and remove any clothing or items.
b. Place an affresh
®
Washer Cleaner tablet in the bottom
of the washer basket.
c. Do not place an affresh
®
Washer Cleaner tablet in the
detergent dispenser.
d. Do not add any detergent or other chemical to the
washer when following this procedure.
e. Close the washer lid.
f. Select the cycle recommended for cleaning the inside
of the washer.
g. Press the START/PAUSE/CANCEL button to start
the cycle.
NOTE: For best results, do not interrupt cycle. If cycle
must be interrupted, press START/PAUSE/CANCEL once.
After the cycle has stopped, run a Rinse & Spin cycle to
rinse cleaner from washer.
Loading ...
Loading ...
Loading ...