Loading ...
Loading ...
Loading ...
CLUTCHIBRAKE
PEDAL
/
FIGURE 6
SCREW
FIGURE 7
'MENT
BOLT
INITIIAL ADJUSTMENTS
1. SEAT INSTALLATION
a,. Place Seat on Seat Pan.. Screw Adjustment Bolt, Lock_
washer and Fiat Washer into Seat° Adjustment Bolt,
Lockwasher and Flat Washer"found in Bag of Parts=
Tighten finger tight.
bo Place Seat in operating position. Sit on the Seat and
press Crutch-Brake Pedal all the way down. if operating
position is not comfortable, adjust Seat,,
Co Raise Seat. Use 3/4 _ wrench to loosen Adjustment Bolt
(Fig° 6),. When adjusted for comfortable operation,
tighten Adjustment Bolt securely.
/
2_
3_
TIRE PRESSURE
Reduce Tire pressure to 14 PSI in front tires; 12 PSi in
rear tires. (Tires were overinflated for shipping).
HOOD
a,. To raise Hood, !ift at rear of Hood,
be To remove Hood, Grill and Side Panels, raise Hood and
loosen one screw on each Side Panel (The screw remains
in the Side Panel) (Fig, 7),
c Unsnap Headlight Connection (Fig, 8),
do Stand in front of Tractor Grasp Hood and tilt forward
and lift off (Fig. 8},
e_ To reinstall, reverse above procedure°
HEADLIGHT
CONNECTION
\
FIGURE 8 - 6-
Loading ...
Loading ...
Loading ...