Loading ...
Loading ...
Loading ...
12
of accidental overheating. To reset,
please contact Customer Experience,
see enclosed guarantee.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
ONLY
DESCRIPTION
A Display
B ON/Standby button
C Power setting button
D - Adjustment button
E + Adjustment button
F Timer button
G Brightness button
H ECO button
I Cord holder
L Wheel
USE
Fitting the wheels
Turn the radiator upside down on a rug or soft surface to
prevent damaging the paint nish. Fully unfold the wheels
by turning them outwards (Fig. 1). Turn the radiator back to
its upright position.
Important! Always operate the appliance in upright
position only (wheels on the bottom, controls on top). Any
other position could create hazardous situation.
Location
Place appliance on the oor beneath the coldest window
in the room, or any other location. Your appliance will re-
duce the eect of cold drafts. The appliance should not be
placed immediately below a power outlet. Do not use this
appliance in rooms with a oor area of less than 43 square
feet (4 sq. m.).
Power connection
The radiator must be connected to a properly polarized
household outlet in perfect working condition. The
appliance will be set in the standby condition. The display
will show the symbol. Keep loose clothing or bedding,
furniture and ammable material away from the power
outlet where the heater is plugged in. After an interruption
of the power supply (power failure or appliance unplugged)
the unit goes always to standby . When the unit is switched
on by pressing the ON/Standby button, the operating
conditions will be same ones previously set.
Heating function
To turn the appliance on, insert the plug into an electrical
outlet then
press the
(B) button.
Press button (C) to set the required power level:
MIN ( ); MED ( ); MAX ( )
(see g. 2)
.
To select the desired temperature, press button + or - (E
or D). By pushing the + or - button once, the temperature
(shown on the display) will increase or decrease by
1°F
(1°C)
. Holding the + or - button
depressed the value will
increase or decrease rapidly.
The appliance allows you to set a temperature of 5°C (41°F)
and a range from 10°C to 28°C (50°F to 82°F).
Anti-freeze function
Setting the temperature to 5°C (41°F), the appliance
will activate the Anti-freeze function. The display will
show the symbol, in this way the appliance will turn
on automatically, at the MAX power, only if the room
temperature falls below 5°C (41°F), to help prevent freezing
conditions. If you wish to go back to the Heating function,
press the "+" button once.
Fig. 1
Your product is equipped with a polarized alternating
current line plug (a plug having one prong wider than the
others). This plug will t into the power outlet only one
way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug
should still fail to t, contact your electrician to replace
your obsolete outlet. Do not attempt to modify the plug to
bypass this safety feature.
Fig. 2
Loading ...
Loading ...
Loading ...