Panasonic ES-LV9Q-S841 5 Blade Wet & Dry Shaver

User Manual - Page 16

For ES-LV9Q-S841.

PDF File Manual, 24 pages, Read Online | Download pdf file

ES-LV9Q-S841 photo
Loading ...
Loading ...
Loading ...
16
Notes
The cleaning liquid will decrease every time it is used, but do not
add detergent and water except when replacing the cleaning
liquid.
Doing so may deteriorate the cleaning function.
Do not wash the self‑cleaning recharger unit with water.
Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration of
the parts.
Wipe with diluted soapy water.
Some cleaning liquid components and skin oil may separate and
adhere to the cleaning liquid unit and cleaning liquid lter. This
does not indicate a problem.
When the water does not drain from the cleaning tray
Do not tilt the self‑cleaning recharger to pour out water. Doing so
may cause the cleaning liquid in the cleaning liquid unit to spill or
cause the self‑cleaning recharger to malfunction.
Beard trimmings may clog the drain at the
bottom of the cleaning tray.
In this case, you cannot clean or dry the shaver.
1. Be sure to remove the AC adaptor from the
self‑cleaning recharger.
2. Place the self-cleaning recharger on a at
surface, and push the beard trimmings down
through the drain (b) with a toothpick etc.
Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑LV9Q
System outer foil and inner
blades
WES9036
System outer foil WES9177
Inner blades WES9170
Special Detergent for Shaver Cleaning & Charging System
WES4L03
When the LOW/STATUS lamp glows
It indicates that the cleaning liquid is due for replacement when
the LOW lamp or STATUS lamp glows for approximately
5 seconds when the SELECT button is pressed.
Lamp on the
self-cleaning recharger
Content of notication
The LOW lamp glows.
Replacement of the cleaning
liquid is required in approximately
7 days.
Prepare the detergent.
The STATUS lamp glows.
Replace the cleaning liquid.
(Modes other than the “AUTO” mode
can be used even if it is not replaced.)
If you think the replacement
should not be due yet.
Is the cleaning liquid unit
correctly attached?
Is the self‑cleaning recharger
placed in a level surface?
Is the self‑cleaning recharger used
outside the range of the
recommended usage temperature?
(Only “Charge” mode can be used.)
Loading ...
Loading ...
Loading ...