Loading ...
Loading ...
Loading ...
English - 26
INFORMATION CODES
The Control Panel displays information codes to help you understand what is occurring with your
dishwasher.
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
troubleshooting
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
WARNING
High-water level
Not reaching required
temperature
If your dishwasher has a problem, the CODE SYMBOL lights blink as shown below.
60
60
60
60
60
60
No water
60
60
Possible
e water tap isn't opened.
e pressure switch is broken.
he wash pump sn't work.
the Main PBA .
e high water switch econds.
e eater is broken.
he emperature detected by themistor is wrong.
he
leakage
switch
is
broken.
Th
Th
Ting
There is a problem with
Thwas activated 5 stimes for 5
The high water switch was on continuously for 120 seconds.
Th
Tt
There is a problem with the Main PBA.
The heater was on continuously for 60 minutes, but the water
did not heat up to the required temperature.
h
There is a problem with the Main PBA.
T
The leakage switch was activated for 2 seconds.
There is a problem with the Main PBA.
The thermistor suffered an open-circuit failure.
There is a problem with the Main PBA.
The thermistor suffered a short circuit failure.
There is a problem with the Main PBA.
A touch key was operated abnormally or operated abnormally.
Example: A key was pressed for more than 30 seconds.
There is a problem with the Sub PBA.
A touch key was operated abnormally or operated abnormally.
Example: A key was pressed for more than 30 seconds
There is a problem with the Main PBA.
There is a problem with the Sub PBA.
Thermistor open-circuit
failure
Thermistor short-circuit
failure
Abnormal operation of
touch key-press
Abnormal signal
If an overflow occurs, turn off the main water supply before calling
i
ther
fo r service.
Water leakage
Loading ...
Loading ...
Loading ...