Loading ...
Loading ...
Loading ...
en-us Cooktop operation
24
¡ Stagger bakeware so that one is not directly above an-
other. Allow 1½'' (4cm) above and below each pan.
High altitude baking
When cooking at high altitudes, recipes and cooking times
will vary. For accurate information, go to
www.csuextstore.com, or write to the Extension Service,
Colorado State University, Fort Collins, Colorado 80521.
There may be a cost for the guides. Specify which high al-
titude food preparation guide you prefer: general informa-
tion, cakes, cookies, breads, etc.
Condensation
It is normal for a certain amount of moisture to evaporate
from the food during any cooking process. The amount de-
pends on the moisture content of the food. The moisture
will condense on any surface cooler than the inside of the
oven, such as the control panel.
Cooktop operation
8 Cooktop operation
Cooktop operation
Here you will find out everything you need to know about
operating your cooktop.
8.1 Turning the cooktop on
▶
Press the cooktop main switch.
a The indicator above the cooktop main switch turns on.
a The symbols for the cooking zones and functions avail-
able at this time light up.
a
lights up in the cooking zone displays.
8.2 Turning the cooktop off
▶
Press and hold the cooktop main switch until all indica-
tors go out.
a All cooking zones are turned off.
a The residual heat indicators remain lit until the cooking
zones have cooled off sufficiently.
Note:The cooktop turns off automatically when all the
cooking zones have been turned off for more than 20sec-
onds.
8.3 Cooking zone settings
In order to make settings on a cooking zone, the cooking
zone has to be selected.
Set the desired power level for each cooking zone in the
settings area.
Setting Power level
lowest power level
highest power level
Intermediate setting for all power levels
Depending on your model, the intermediate
level is displayed on the cooking zone display
¡ as a dot, for example . lights up when you
set the intermediate level between power
level
and .
¡ as . , for example .
Note:The cooktop may temporarily reduce the power au-
tomatically to protect the fragile parts of your appliance
and to prevent the appliance from producing excess noise.
Setting the power level - 800 Series
Requirement:The cooktop is turned on.
1. Place the cookware on the cooking zone.
2. Press
to select the cooking zone .
a
lights up in the cooking zone display.
a
lights up under the cooking zone display.
3. Set the power level in the settings area
Press to set an intermediate level.
Setting the power level - Benchmark® Series
Requirement:The cooktop is turned on.
1. Place the cookware on the cooking zone.
2. Press
or to select the cooking zone .
a
lights up in the cooking zone display.
3. Set the power level in the settings area
Press to set an intermediate level.
Changing the power level
1. Select the desired cooking zone.
2. Set the power level in the settings area.
Turning the cooking zone off
1. Select the desired cooking zone.
2. Select in the settings area.
a The residual heat indicator lights up after approximately
10seconds.
Loading ...
Loading ...
Loading ...