Loading ...
Loading ...
Loading ...
Handle Positions
Using your foot, press the handle release pedal,
located on the lower left side of the vacuum to
recline to a cleaning position.
1. Upright - For storage and above floor
cleaning with tools.
2. Normal Cleaning - Presshandle release
edal once. This position is used for most
ousehold floor cleaning tasks.
2o
Transportin_l your cleaner
1. To move your vacuum cleaner from room
to room, put the handle in the upright
position, tilt the cleaner back on its rear
wheels and push forward.
2. The vacuum cleaner can also be moved by
using the carry handle on the back.
Hei_lht Adjustments
There are seven height settings available for
various floor surfaces. Turn the dial on the foot
of the cleaner to the desired setting.
Lowest setting - for low pile carpeting
or bare floors. To pick up debris it maybe
necessary to move up one setting.
Medium setlings - for medium pile carpet.
High setting - for high pile and most
shag/frieze carpet.
NOTE: For optimal carpet cleaning
performance, adjust to the lowest
p.ractical setting. If your cleaner is
difficult to pusH, adjust to the next
higher setting.
If the dial is difficult to turn, tilt the cleaner
back slightly to take the weight off of the
foot while turning.
ATTENTION:
Some frieze carpets have long, delicate
fibers or threads that may be damaged
by the rotating brush during vacuuming.
Itis recommended the rotating brush be
turned OFF when cleaning this lype of
carpet.
7
www. bi s se II. co m _, 800.237.7691
Loading ...
Loading ...
Loading ...