Loading ...
Loading ...
Loading ...
The range is supplied as a natural gas unit and should not require any adjustment of the aeration. If the
appliance is ordered and specified as a ULPG gas then it will be converted by Eurolinx prior to dispatch
and should not require any adjustment to the aeration. Follow the steps below to convert to ULPG gas
and to adjust the aeration of the burners. Remove the pan supports, caps and burners from the hob.
Remove the screws that are securing the hob to the range and lift top up to gain access to the
burner venturie.
Note: Some models do not have a one piece hob; these units will have securing screws
around the outside edge of the spillage bowl that will need to be removed to gain access to the
underside of the cooking hob
Remove screw “F” and remove air damper “R” Replace the Natural gas injector that is located at entry
point of the venturie “U” with the ULPG injector. Use the chart below to identify the correct injector for
each type of burner. Replace the air damper “R” and refit screw “F” leave lose to allow adjustment of
aeration.
adaptation to different types of gas
freestanding cookers
42 ILVE Freestanding Operating Manual
Loading ...
Loading ...
Loading ...