Loading ...
Loading ...
Loading ...
12
Lighting Instructions
Before Lighting
Visually inspect the gas line, hose and all connections for signs of wear, abrasion or cuts. If evidence of
deterioration is visible, replace the part prior to use.
If you smell gas, check for leaks. If odor continues, turn off fuel supply and immediately call for service.
Keep your face and body away from the grill top when lighting.
Main/Grill Burner Lighting
1. Open lid and make sure all burners are in the ‘OFF’ position.
2. Push in and turn burner control knob to ‘HI/IGN’ position.
3. The pilot flame will ignite at this point, lighting the main burner.
4. Continue to hold the knob in until you have ignition.
5. If there is no ignition after 2-3 seconds, turn the knob back to the “OFF” position and repeat steps 2-4.
Rotisserie Burner Lighting
1. Open lid and make sure all burners are
in the ‘OFF’ position.
2. Push in and turn the rear rotisserie
control knob to “ON” position. You
should hear the igniter click and light
the rear burner.
3. If you do not see the rear burner ignite,
repeat Step 2 turning the control knob
slower before the click.
Manual Lighting
If grill or rotisserie burners do not light with igniter, they
can be lit manually. On rear burner use long butane lighter
or hearth match, turn rear burner to high and hold long
match or butane hearth lighter to burner surface. Back
burner should light immediately.
For main burners, turn knob on far right burner to high.
Place match or lighter at the top of the flash tube on right
side of basin.
Models SO301BQRRL and SO421BQRRL do not have the flash tube and must be lit directly at the U-burner.
Remove Warming Rack BEFORE turning on rear
rotisserie burner, Not doing so will result in
damage not covered under warranty!
!! VERY IMPORTANT !!
Loading ...
Loading ...
Loading ...