Loading ...
Loading ...
Loading ...
Auto‐
matic
light
Boil‐
ing
1)
Frying
2)
Mode H6 On Fan
speed 2
Fan
speed 3
1)
The hob detects the boiling process and acti‐
vates fan speed in accordance with automatic
mode.
2)
The hob detects the frying process and acti‐
vates fan speed in accordance with automatic
mode.
3)
This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch until you hear a beep and
keep it pressed until you hear the
second beep.
3. Touch for 3 seconds until or
comes on.
4. Touch
until H and a digit (0 - 6)
comes on. H5 is the default setting.
5. Touch of the Timer to select the
desired mode (H0 - H6). The chosen
mode activates automatically after 10
seconds.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
When you finish cooking and
deactivate the hob, the hood
fan may still operate for a
certain period of time. After
that time the system
deactivates the fan
automatically and prevents
you from accidental
activation of the fan for the
next 30 seconds.
Operating the fan speed manually
You can also operate the function
manually. To do that touch when the
hob is active. This deactivates automatic
operation of the function and allows you
to change the fan speed manually. When
you press you raise the fan speed by
one. When you reach an intensive level
and press again you will set fan speed
to 0 which deactivates the hood fan. To
start the fan again with fan speed 1 touch
.
To activate automatic
operation of the function,
deactivate the hob and
activate it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so set the automatic mode to
H1 – H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
6.14 Power management
function
• All cooking zones are connected. See
the illustration.
• The hob and both ovens are
connected to one phase.
• The phase has a maximum electricity
load.
• The function divides the power in the
appliance. The oven is more
important than the hob.
• The function activates when the total
electricity load in the appliance is
exceeded.
• The function reduces the power of the
cooking zones to prevent a circuit
overload.
• The heat setting display of the
reduced zones changes between two
levels.
www.aeg.com16
Loading ...
Loading ...
Loading ...