Loading ...
Loading ...
Loading ...
8
INITIAL INSTALLATION
4. Loosen all four preassembled mounting bracket
screws (S), then completely remove the two
mounting bracket screws (S) from the round holes
of canopy (E). Set aside for later use.
Detach mounting bracket (D) from canopy (E).
5. Attach mounting bracket (D) to outlet box (not
included) using screws and washers provided with
the outlet box.
CAUTION: It is very important to use the proper
hardware when installing the mounting bracket (D) as
this will support the fan.
Important: If using the angle mount, ensure the open
end of the mounting bracket (D) is installed facing the
higher point of the ceiling.
6. Remove motor screws (R), motor blocks and washers
from underside of the motor assembly (G). Discard
the motor blocks and washers but keep the motor
screws (R) for blade arm attachment.
Note: The notch in the tter plate allows a Phillips
screwdriver (not included) access to motor screws
(R).
G
5
6
4
E
D
S
D
D
R
Standard
Mounting
Angle
Mounting
Motor
Block
Washer
Loading ...
Loading ...
Loading ...