Loading ...
Loading ...
Loading ...
- 5 -
POM-111241 EN
PARTS DESCRIPTION
1. Measuring cap
2. Top cover
3. Popcorn chamber
4. Ventilation holes
5. Popcorn chute
6. ON/OFF switch
Note! When assembling, make sure the popcorn chute and the “Popcorn” logo are at the same side as the
picture shows.
OPERATION GUIDELINES
NOTE: Before using the popcorn maker for the first time, we recommend you clean the unit following the
instructions under “CLEANING AND MAINTENANCE”. Caution: it is not allowed to put any ingredients such as
oil, shortening, butter, margarine, salt and sugar, otherwise the machine will be destroyed.
1. Take off the measuring cap from the top cover and fill the popcorn chamber with corn kernels. Use the
measuring cap to hold corn kernels. Never let the corn kernels exceed the scale line inside the cap. The
maximum amount of corn kernels processed one time is 60g.
2. After pouring the corn kernels into the popcorn chamber, place the measuring cap back to the top of the
appliance.
3. Place a large bowl under the popcorn chute to catch the popcorn.
4. Insert the plug into an appropriate power outlet.
5. Turn on the appliance by pressing the ON/OFF switch.
6. After about 2-4 minutes, the popcorn starts popping out through the popcorn chute. When the popping is
finished, turn off the appliance and tip the popcorn maker forward to release any remaining popcorn in the
popcorn chamber.
7. Always allow the appliance to cool down approximately 15 minutes before start making the second batch
of popcorn. Keep the switch on “O” position and unplug the supply cord when the unit is not in use.
Caution! Pay attention not to get burnt when touching the measuring cap and top cover, as these parts are very
hot when the popcorn maker is functioning.
CLEANING AND MAINTENANCE
1. Turn off the popcorn maker and ensure it is unplugged from the power supply.
2. Ensure the unit has cooled fully prior to cleaning, reusing or storing.
3. Never immerse the popcorn maker’s body, cord set or plug in water or any other liquid. Do not place any
part of the appliance in a dishwasher.
4. Wipe the appliance after each use with a damp cloth. Dry thoroughly.
5. Do not use abrasive cleaning products on this appliance.
6. The measuring cap and top cover can be cleaned in warm soapy water. Rinse and dry thoroughly before
placing them back onto the appliance.
7. Store the assembled appliance in a clean and dry place.
SPECIFICATIONS
Supply Voltage: 220-240V ~ 50/60Hz
Power consumption: 1200W
Loading ...
Loading ...
Loading ...