RHWU88 User Manual

Loading ...

BoiL-Dry proteCtion

Note: To prevent the boil-dry feature activating, always make sure water is visible in the water

gauge.

• Theurnisprotectedbyathermallimiterwhichcanbemanuallyreset.Themanualreset

button is located under the base of the urn.

• Iftheurnhasboileddry,thethermallimiterwillautomaticallyswitchofftheelement.The

lights will also remain off until manually reset.

Note: The urn must be unplugged before it can be reset.

• Toresettheurn,waituntiltheappliancehascooleddown.

• Presstheresetbutton.

• Addwateruntilvisibleinthewatergauge.

• Plugthepowercordintothewallpoweroutletandswitchiton.

• SettheOn/OffswitchtotheOnposition,checkifthe"Heating"lightison.Ifthelightison,it

indicatestheurnhasrecoveredtonormalworkingcondition.

• Ifthe“Heating”lightisstilloff,switchoffthepowerandremovetheplugfromthewallpower

outletandrepeattheaboveprocessagain.Thismayneedtobedoneseveraltimesuntilthe

urn returns to normal working condition.

• Iftheresettingprocessdoesnotswitchtheurnbackon,pleasecallcustomerservice.

Note: This facility is for the protection of the user as well as the components. Do not attempt to

bypass the boil dry protection.

Care anD MaintenanCe

• Switchthepoweroffandremovetheplugfromthewallpoweroutlet.

• Allowtheurntocooldownfully.

• Wipeovertheoutsideoftheurnwithadampcloth.Amilddishwashingdetergentmaybe

usedifrequired.

• Ensurethepowercordandswitchesremaindry.

• Donotimmersetheurninliquid.

• Donotuseharshorabrasivecleaningagentsorsolvents.

De-sCaLe reguLarLy

To maintain the performance of your urn, it should be descaled every three months or so. Descale

more frequently if you live in a hard water area.

• Fillyoururnwithfreshwatertothe10cupmarkonthewatergauge.

• Add4to5teaspoonsofcitricacidoraproprietarydescalingproducttothewaterintheurn.

• SwitchtheOn/OffswitchtotheOnposition.

• Allowthewatertoheatuntilthe‘Hot’lightilluminates.LeavetheurnOnforanadditional

15minutes.

• SwitchtheOn/OfftotheOffpositionandallowtheurntocool.

• Draintheurnthroughthewatertap.Therewillbesomewaterremainingintheurn

– carefully lift the urn and pour out the remaining water.

• Rinseouttheurnwithfreshwatertoremoveanydescalingsolutionresidue.

Loading ...

User Manual - Page 6