Loading ...
Loading ...
Loading ...
Technical Data
Burner configuration
NG
LPG
Nozzles Dia. (mm)
Btu/hr
Nozzles Dia. (mm)
Btu/hr
Wok burner
2.18
18000
1.22
18000
Rapid burner
1.56
12000
1.01
12000
Semi rapid burner
1.42
9500
0.88
9500
Auxiliary burner
1.11
6000
0.72
6000
Different models have different total heat input, please refer to page 3.
Gas Type and working pressure:
NG gas pressure at 4.0 in w.c.
LPG gas pressure at 10 in w.c.
Important safety requirements
Location
The cooktops may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom,
shower room or garage. Before making the cut out in the worktop ensure that there is a minimum
distance of 3.94” between the rear edge of the cooktops and the wall. A minimum distance of 3.94”
must be left between the side edges of the cooktops and any adjacent cabinets or walls. The minimum
distance combustible material can be fitted above the cooktops in line with the
edges of the cooktops is 18”. If it is fitted below 18” a space of 1.97” must be allowed from the edges of
the cooktops. The minimum distance combustible material can be fitted directly above the cooktops is
30”. Maximum depth for the overhead cabinets is 13”. The distance from the front edge of the cooktop
to the front edge of the countertop should be 3.0”.The distance between the closet should be 23.62”
(not less than the depth of the cooktop itself) (see Figure 6)
Notice that a horizontal separation below the base of the hotplate is needed.
The minimum distance between this separation shall not exceed 5.90”.
10
Loading ...
Loading ...
Loading ...